Digital Audio Graphics Express
5718 Satsuma Avenue, North Hollywood, CA 91601


Acoustic Image 611AA Plus - Coda S4+ 2-Channel, 600W Convertible Combo with Effects

611AA Plus - Coda S4+ 2-Channel, 600W Convertible Combo with Effects 
611AA Plus - Coda S4+ 2-Channel, 600W Convertible Combo with Effects 
611AA Plus - Coda S4+ 2-Channel, 600W Convertible Combo with Effects 
Brand:Acoustic Image ›
Sku:611AA Plus
Price:$ 1499.00

Features – Amp Head
Extended frequency range, high fidelity sound
Light weight (<4 lbs.), small size (10.2"x 8.2"x 3.5")
Unique, slanted front chassis
Mounts in cabinet using Cabrio Docking System
Separate XLR and 1/4 inch inputs in each channel can be used simultaneously
48V phantom power and 10 dB gain select for mic input
Input level control per channel
Four band EQ per channel
Selectable phase reverse and sweepable low cut filter per channel (phase reverse can be converted to low pass speaker emulation filter with internal jumper option)
Effects loop per channel
Selectable reverb and delay effects with level and rate controls and pseudo stereo output
Direct out with selectable 10 dB pad, pre/post switch and ground lift headphone output
Switchable limiter
Mute switch
Mono or stereo output from the preamp section
Selectable internal jumper options for gain and stereo operation
High fidelity, low noise operation: 110 dB SNR at direct out
Automatic voltage switching for universal AC mains operation
650 Watt output at 4 ohms (music power)
Dual speaker outputs with speakon connectors

Features – Speaker Cabinet
Sealed two-way speaker system
Lightweight (22 lbs) structural foam cabinet
Downfiring poly cone 10 inch driver + 5 inch midrange with level switch
Comes with a fitted slip cover with shoulder strap

Technical Specs

Frequency Response -30 Hz-18 kHz (40-14 kHz ±3 dB)
Max SPL - >112 dB at 1 meter
AC Power - 100V to 240V, 50/60 Hz, switched automatically
Size -12"H x 15"W x13"D
Weight - 22 lbs, 19 lbs (EX)

Amp Head

Frequency Response - 20 Hz - 20 kHz (±0.5 dB)
Signal to Noise Ratio - >110 dB at direct out

Controls and Inputs
Mic Input - 600 ohm balanced, XLR connector, switchable 10 dB gain
Phantom Power - 48 volts, on/off switch w/LED indicator
Instrument Input - 1 M Ohm impedance, 1/4 inch jack
Direct Out - +4 dB, balanced, XLR, ground lift, pre/post EQ selector, switchable 10 dB pad
Effects Loop - Parallel type
Low Control - Shelving type, ±12 dB at 50 Hz
Low Mid Control - ±12 dB at 250 Hz
Hi Mid Control - ±12 dB at 1200 Hz
Treble Control - Shelving type, ±12 dB at 8 kHz
Low Cut Filter - -12 dB/octave sweepable from 30 to 150 Hz
Phase Reverse - Switchable 180 degree phase reverse
Speaker Emulator - (if selected) -12 dB/octave at 4 kHz
Effects Type - 24 bit digital with 3 programs

Reverb with variable decay time,
Delay/Reverb with variable delay time
Delay with variable delay time
All have variable wet/dry mix and “pseudo stereo” capability

Amp head
Topology - Class D (PWM)
Switching Frequency - 500 kHz
Output Power 8 Ohm - 300W rms continuous, 350W rms music (40% duty cycle), 500W peak transient
Output Power 4 Ohm - 500W rms continuous, 650W rms music (40% duty cycle), 1000W peak transient
Ext Speaker Output - Speakon type (pole 1), 2 Ohm min load including internal speakers, if connected

Speaker System
Woofer - 10 inch, downfiring
Midrange - 5 inch, forward firing with 2 position level control switch
Crossover - Passive, alignment corrected
Impedance - 8 Ohm
Power rating - 250W

Supplied Accessories
Fitted slip cover with cord storage pocket and shoulder strap

 Digital Audio Graphics Express
5718 Satsuma Avenue
North Hollywood, CA 91601
© 2021 Digital Audio Graphics Express • Privacy PolicyWebsite Terms

We will beat any price!

Website by

Scan QR Code with Phone