Digital Audio Graphics Express
5718 Satsuma Avenue, North Hollywood, CA 91601


Traynor YBA100 - 100-Watt Bass Head

YBA100 - 100-Watt Bass Head 
YBA100 - 100-Watt Bass Head 
Enlarge ↗
BrandTraynor ›
Price:$ 1059.00

The YBA series signature is its versatility. The stock YBA100 ships with 4 hand-selected and tested 6L6 power tubes, delivering a classic smooth tube tone. For players looking for a more aggressive bass sound, the stock 6L6 tubes can be easily changed to any high quality EL34 tube set and be re-biased in the field, making the YBA100 essentially two amps in one chassis.

The all-tube Traynor YBA100 100-watt bass head has been designed to be the ultimate tube head for the working musician. LED indicators on the rear of the amp show proper tube function and status. In rare cases where a tube may fail, the YBA100 will lock out the problem tube and its partner, allowing the amp to finish the show on the remaining active tubes.

Smaller, portable and accessible, the YBA 100 is a lunch-box style amp, lighter than most 100 watt tube amps on the market. The YBA100 is the ideal amp for today’s bassist, providing the ideal amount of output for tighter stage plots.

Key Features
-Three 12AX7 pre-amp tubes, a 12AU7 Driver (YBA300 only), and 6L6/EL34 power
output tubes (12 on the YBA300 and 4 on the YBA100). That’s 300 watts on the YBA300 (100 watts on the YBA100) of all tube power and tone
-True balanced D.I./Line output. Selectable Pre-EQ or Post-EQ and Ground Lift.
-Tuner Out jack.
-3-Band tone controls with frequency selectable Mid control along with Deep, Bright, and Resonance tone switches.
-Effects Send and Return jacks (Pre-Amp Out and Power Amp Input). These jacksprovide direct access to the Traynor all-tube bass amplifier’s signal chain so you may slave out, or slave into, another amp; or you can use these jacks as an effects loop (for professional-grade signal processing equipment).
-Individual tube Bias Adjust, Indicator LEDs, and lockout so you will always know the status of your tubes.

Type All Tube Bass Head
Power @ min. impedance (watts) YBA100: 100 @ 4/8 ohms, switchable
Minimum Impedance (ohms) YBA100: 4
Burst Power – 2 cycle YBA100: 150 watts
Frequency Response (Hz +/-3dB) 30 – 16,000
Hum and Noise (dB) -90db
Input Channels 1
Channel 1 – inputs 2 x 1/4inch
Channel 1 – controls Gain
Master Volume Control Yes
Main Tone Controls
Treble, Mid, Frequency, Bass, Bright Switch, Deep Switch, Resonance Switch
Input Sensitivity (mV) 20
Master Outputs Pre-amp out (Pre Master)
Line Out (type / configuration) XLR Balanced (Pre/Post, Grnd Lift)
Line Out Sensitivity (Vrms) 1V
Effects Loop / Location Pre-amp out, Power Amp in, Loop Thru
Effects Return Sensitivity (Vrms) 1V
LED Indicators Power/Standby
External speaker output / location 2 x 1/4inch, 1 Speakon (Rear)
YBA100: Impedance Selector 4/8 ohms
YBA100: Tubes: 3x12AX7, 4x6L6
Tuner output 1/4inch
Dimensions (DWH, inches) YBA100: 8.5×8.5×8
Dimensions (DWH, cm) YBA100: 21.5x47x20
Weight (lbs / kg) YBA100: 22 / 10

 Digital Audio Graphics Express
5718 Satsuma Avenue
North Hollywood, CA 91601
© 2023 Digital Audio Graphics Express • Privacy PolicyWebsite Terms

We will beat any price!

Website by

Scan QR Code with Phone